![]() ![]() This makes sure p10p1 always comes online 5 seconds after p9p1.īut you can also set a static MAC address for the bonding device: auto bond0Ĭhoose what you prefer or works best in your situation. This has been filed as bug #1288196 with Ubuntu, but no fix from that side so far. Configuration - Example 1 Modify the /etc/network/interfaces file: auto bond0 iface bond0 inet static address 10.31.1.5 netmask 255.255.255.0 network 10.31.1. ![]() Finally, let’s select Bond: Then, let’s set the profile name and the device’s name nm-bond: Now, let’s provide a slave connection with Add and create an Ethernet. Then we’re going to create a new connection with Add. So, let’s start it and go to Edit a connection menu. IPv6 with SLAAC (Stateless Auto Configuration) nmtui is a text user interface to configure NetworkManager.This behavior makes the MAC address selection inconsistent between reboots and that might cause problems with: The first device to be plugged into the bonding device determines which MAC address the bonded device gets.ĭue to hardware timing it might be p9p1 OR p10p1 which is the first. With the ‘new’ style for configuring bonding under Ubuntu your bond device will not always have the same MAC address across reboots.įor example, you configure your bond in the /etc/network/interfaces file: auto p9p1ĭuring boot, both interface p9p1 and p10p1 will be hot-plugged under bond0. ![]()
0 Comments
Leave a Reply. |